1、適用范圍：五金、金屬、玻璃、陶瓷、電鍍、大理石等材料絲印移印2、特性：耐沖壓、耐折彎、免烘烤自干、耐酒精、耐酸堿、耐汽油、耐腐蝕。3、技術參數：a.粘度：8000-12000CPS；b.細度：5UM↓、光澤：60°↑；c.干燥條件：自干24小時；d.鉛筆硬度：2H↑；e.耐酒精：99%乙醇500g力來回超過30次；f.耐磨：500g力來回超過30次；g.過網性能：77T-145T網紗；4、稀釋劑的選擇：稀釋劑：S-3；使用前添加10%-15%的DB-01固化劑效果更好。5、注意事項：a.不可與其它油墨混用；b.使用S-3慢干稀釋劑稀釋?zhuān)籧.加過固化劑的油墨必須在3小時內用完；d.密封保存，遠離火源。6、應急處理措施：備注：由于材料及使用中的變數，可能是結果會(huì )有變化，以上數據僅供參考，使用前請自行測試。1, the scope of application: no halogen ink can be printed, ABS, PC, PS, acrylic, metal, electroplating, UV surface.2, characteristics: medium and dry, ethanol, acid resistance.3, technical parameters:A. viscosity: 8000-12000CPS;B.: 5UM:: gloss, fineness of 60 degrees up;C. dry conditions: 24 hours from dry;D. pencil hardness: 2H up;E. resistance to alcohol: 99% ethanol 500g force back and forth more than 30 times;F. wear: 500g force back and forth more than 30 times;G. n e t performance: 77T-145T;4, thinner choice: thinner: S-3; before using the 10%-15% to add DB-01 curing agent better effect.5, matters needing attention:A. and other printing ink;B. using S-3 slow dry diluent dilution;C. plus the curing agent of the ink must be used up within 3 hours;D. sealed to save, away from the fire source.6, emergency treatment measures:A. such as dipped into the eye immediately clear water cleaning, serious medical treatment,B. fire fighting measures: dry powder, foam fire extinguisher or sand.] Note: due to the materials and the use of variables, possibly is the change, the above data are for reference only, before using please self testing.